Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching is available in Saudi Arabia.
Find out all you need to know about Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching before buying : Price, Test video, Datasheet, Similar products.
Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching – Features & Prices in Saudi Arabia :
Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching Passing Lamps+Adapter Ring Compatible with Touring Road King Ultra Classic Electra Street Glide Tri Cvo Heritage Softail Slim Deluxe Fatboy
Brand
LX-LIGHT
Color
Silver
Specific Uses For Product
前大灯
Light Source Type
LED
Vehicle Service Type
Road king
Year
2012
Special Feature
防水
Voltage
12 Volts
Wattage
45 watts
Position
Front
Lens Color
Clear
Lens Material
Polycarbonate
Item Dimensions LxWxH
7 x 7 x 3 inches
Manufacturer
LX-LIGHT
Model
7 inch led headlight+4.5 inch fog light+7 inch adapter ring
Item Weight
5.83 pounds
Product Dimensions
7 x 7 x 3 inches
Item model number
0048A+003B+JB
Is Discontinued By Manufacturer
No
Manufacturer Part Number
0048A+003B+JB
Special Features
防水
Test video – Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching :
Product highlights :
Easy installation – Plug & Play,necessary Adapters Included – Usually in 20 minutes or less,this new 7inch LED headlights and 4.5inch LED passing lights provide a high performance safety solution with improved light output, glare reduction, and EMC built-in to avoid electromagnetic interference and flicker issue.
Super Bright – Made with original Osram LED Chips,50% brighter than other similar headlights kit.3600LM High Beam, 2400LM Low beam for 7 Inch led headlight; 1440LM for 4.5 inch passing light, Anti-fog and hard-coated PC lens to prevent cracking and formulated to resist UV or chemical damage.Also with the Superior condensation management.Color Temperature:6000K.Maintenance Free, Water-proof IP67.
DOT Approved – DOT approved guarantees that your lights are legal on the road, meeting section 108 requirements of the Federal Motor Safety Standards. Your DOT-compliance is clearly etched on the lens of the light.
Compatible with Road King, Street Glide, Ultra Classic, Electra Glide, Heritage Softail, Softail Deluxe, Softail Slim, Fatboy, Switchback, Ultra Limited, Tri, CVO, 1989-2019. NOTE: Switchback, Road King, Street Glide, Electra Glide and Ultra Limited needs ring to fix firmly, “2014 to 2019 “Street Glide Special” and “Road King Special” needs an H4 to H9 adapter( PACKAGE INCLUDED), 2013 TOURING CVO Ultra Classic Electra Glide FLHTCUSE8 will need to modify wire harness for fog lights.
Package include:1 pcs chrome 7 inch led headlight+2 pcs chrome 4.5 inch fog lights+1 pcs 7 inch chrome adapter ring+ 2pcs wire adapter for headlight.
➕ What is the price of Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching in Saudi Arabia ?
The price of Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching in-store is SAR VAT.
➕ When Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching was released ?
The release date was .
➕ What is the price of Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching cheap used ?
The price of Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching used is SAR VAT.
➕ What are the main characteristics of Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching ?
Special specifications :
Easy installation – Plug & Play,necessary Adapters Included – Usually in 20 minutes or less,this new 7inch LED headlights and 4.5inch LED passing lights provide a high performance safety solution with improved light output, glare reduction, and EMC built-in to avoid electromagnetic interference and flicker issue.
➕ Is it interesting to buy this product ?
The best people who can answer you are customers who have already bought and tested this product (See Customer Reviews). This product is rated 4.6 / 5 on Amazon.
➕ Where to buy Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching in Saudi Arabia ?
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
Proof of purchase :
Does the shop give you an invoice ?
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
10 reviews for Dot Appoved Chrome 7inch LED Headlight+4.5inch Matching
Rated 5 out of 5
F. G (verified owner)–
Just received: updated after test ride last night – Received kit today. I did have to use the adapter ring that was included. I ride a 2007 HD Electra Glide Classic.
F. D (verified owner)–
– Install date Oct.13/2019 on a 2014 Softail Deluxe / Installing the head light was a comfortable experience straight forward did not need the ring that comes with it. The bezel ring went back on to 98% of the original mark. The only issue was their 3 prong plug on the head light did not seat all the way inside the HD connector. Had to put some electrical tape on them so they would not come apart. Based on that I give the head light 4 out of 5 stars. The passing lights were another story, a lot of work trying to fit their larger then the OEM in the passing lamp housing.The bezel secures but the ring is 80% where it should be.On a fitment score I give it a 3 out of 5. Appearance and performance I give them 4.5 out of 5. Buy again…….maybe shop around first.
Rated 5 out of 5
K. N (verified owner)–
Bright and good light pattern – I love to do side by side reviews. Doing some work on the bike, so figured it was a good time to upgrade to LED. In my pictures, this light (purchased from Amazon) is on the left of the power supply, and the beam pattern is on the top (and upside down). The other light is a competitor from a motorcycle supply house.
L. R (verified owner)–
– It appears to be a great kit. I installed it on my 06 Road King. First of all the connectors for the passing lights are different so they must be hard wired in, other than that they fit great. The headlamp…oh boy, for starters you have to create a new slot with a dremel tool for the attaching wire at the top or else you have a 1/8 ” gap between the bucket and the trim ring. Then you have to bend that bracket down and grind some off of it or else the trim ring sticks up and is not flush with the bucket, it will always be slightly up. When aiming the light you cannot get it down enough, 35″ at 25 ft. because of 2 things, the top spring on the adjuster is not long enough so it has to be stretched and the adjusting bolt is not long enough. So now that you stretched the spring and installed a new bolt, got everything aimed and the trim ring installed and looking reasonably well, take it for a ride and the adjusting screws loosen off from vibration. Take it all apart, apply blue loctite to the adjustin screws plus once adjusted as a precautionary measure put lock nuts on the back side of the adjusting screws. In final the trim ring will rattle while riding, take it off and add some very thin weather strip to stop the metal on metal contact. In the end so far they work great. But you better be good at modifying and have plenty of time on your hands. Are they worth it? Thats a tough question.
Rated 5 out of 5
P. R (verified owner)–
Look no more – Ive had these on my bike for about 5 years now and they have worked great and look great it is night and day between the old ones if you are looking i would definitelyreconmend
Rated 5 out of 5
P. R (verified owner)–
Look no more – Ive had these on my bike for about 5 years now and they have worked great and look great it is night and day between the old ones if you are looking i would definitelyreconmend
Rated 5 out of 5
F. G (verified owner)–
Just received: updated after test ride last night – Received kit today. I did have to use the adapter ring that was included. I ride a 2007 HD Electra Glide Classic.
F. D (verified owner)–
– Install date Oct.13/2019 on a 2014 Softail Deluxe / Installing the head light was a comfortable experience straight forward did not need the ring that comes with it. The bezel ring went back on to 98% of the original mark. The only issue was their 3 prong plug on the head light did not seat all the way inside the HD connector. Had to put some electrical tape on them so they would not come apart. Based on that I give the head light 4 out of 5 stars. The passing lights were another story, a lot of work trying to fit their larger then the OEM in the passing lamp housing.The bezel secures but the ring is 80% where it should be.On a fitment score I give it a 3 out of 5. Appearance and performance I give them 4.5 out of 5. Buy again…….maybe shop around first.
Rated 5 out of 5
K. N (verified owner)–
Bright and good light pattern – I love to do side by side reviews. Doing some work on the bike, so figured it was a good time to upgrade to LED. In my pictures, this light (purchased from Amazon) is on the left of the power supply, and the beam pattern is on the top (and upside down). The other light is a competitor from a motorcycle supply house.
L. R (verified owner)–
– It appears to be a great kit. I installed it on my 06 Road King. First of all the connectors for the passing lights are different so they must be hard wired in, other than that they fit great. The headlamp…oh boy, for starters you have to create a new slot with a dremel tool for the attaching wire at the top or else you have a 1/8 ” gap between the bucket and the trim ring. Then you have to bend that bracket down and grind some off of it or else the trim ring sticks up and is not flush with the bucket, it will always be slightly up. When aiming the light you cannot get it down enough, 35″ at 25 ft. because of 2 things, the top spring on the adjuster is not long enough so it has to be stretched and the adjusting bolt is not long enough. So now that you stretched the spring and installed a new bolt, got everything aimed and the trim ring installed and looking reasonably well, take it for a ride and the adjusting screws loosen off from vibration. Take it all apart, apply blue loctite to the adjustin screws plus once adjusted as a precautionary measure put lock nuts on the back side of the adjusting screws. In final the trim ring will rattle while riding, take it off and add some very thin weather strip to stop the metal on metal contact. In the end so far they work great. But you better be good at modifying and have plenty of time on your hands. Are they worth it? Thats a tough question.
F. G (verified owner) –
Just received: updated after test ride last night – Received kit today. I did have to use the adapter ring that was included. I ride a 2007 HD Electra Glide Classic.
F. D (verified owner) –
– Install date Oct.13/2019 on a 2014 Softail Deluxe / Installing the head light was a comfortable experience straight forward did not need the ring that comes with it. The bezel ring went back on to 98% of the original mark. The only issue was their 3 prong plug on the head light did not seat all the way inside the HD connector. Had to put some electrical tape on them so they would not come apart. Based on that I give the head light 4 out of 5 stars. The passing lights were another story, a lot of work trying to fit their larger then the OEM in the passing lamp housing.The bezel secures but the ring is 80% where it should be.On a fitment score I give it a 3 out of 5. Appearance and performance I give them 4.5 out of 5. Buy again…….maybe shop around first.
K. N (verified owner) –
Bright and good light pattern – I love to do side by side reviews. Doing some work on the bike, so figured it was a good time to upgrade to LED. In my pictures, this light (purchased from Amazon) is on the left of the power supply, and the beam pattern is on the top (and upside down). The other light is a competitor from a motorcycle supply house.
L. R (verified owner) –
– It appears to be a great kit. I installed it on my 06 Road King. First of all the connectors for the passing lights are different so they must be hard wired in, other than that they fit great. The headlamp…oh boy, for starters you have to create a new slot with a dremel tool for the attaching wire at the top or else you have a 1/8 ” gap between the bucket and the trim ring. Then you have to bend that bracket down and grind some off of it or else the trim ring sticks up and is not flush with the bucket, it will always be slightly up. When aiming the light you cannot get it down enough, 35″ at 25 ft. because of 2 things, the top spring on the adjuster is not long enough so it has to be stretched and the adjusting bolt is not long enough. So now that you stretched the spring and installed a new bolt, got everything aimed and the trim ring installed and looking reasonably well, take it for a ride and the adjusting screws loosen off from vibration. Take it all apart, apply blue loctite to the adjustin screws plus once adjusted as a precautionary measure put lock nuts on the back side of the adjusting screws. In final the trim ring will rattle while riding, take it off and add some very thin weather strip to stop the metal on metal contact. In the end so far they work great. But you better be good at modifying and have plenty of time on your hands. Are they worth it? Thats a tough question.
P. R (verified owner) –
Look no more – Ive had these on my bike for about 5 years now and they have worked great and look great it is night and day between the old ones if you are looking i would definitelyreconmend
P. R (verified owner) –
Look no more – Ive had these on my bike for about 5 years now and they have worked great and look great it is night and day between the old ones if you are looking i would definitelyreconmend
F. G (verified owner) –
Just received: updated after test ride last night – Received kit today. I did have to use the adapter ring that was included. I ride a 2007 HD Electra Glide Classic.
F. D (verified owner) –
– Install date Oct.13/2019 on a 2014 Softail Deluxe / Installing the head light was a comfortable experience straight forward did not need the ring that comes with it. The bezel ring went back on to 98% of the original mark. The only issue was their 3 prong plug on the head light did not seat all the way inside the HD connector. Had to put some electrical tape on them so they would not come apart. Based on that I give the head light 4 out of 5 stars. The passing lights were another story, a lot of work trying to fit their larger then the OEM in the passing lamp housing.The bezel secures but the ring is 80% where it should be.On a fitment score I give it a 3 out of 5. Appearance and performance I give them 4.5 out of 5. Buy again…….maybe shop around first.
K. N (verified owner) –
Bright and good light pattern – I love to do side by side reviews. Doing some work on the bike, so figured it was a good time to upgrade to LED. In my pictures, this light (purchased from Amazon) is on the left of the power supply, and the beam pattern is on the top (and upside down). The other light is a competitor from a motorcycle supply house.
L. R (verified owner) –
– It appears to be a great kit. I installed it on my 06 Road King. First of all the connectors for the passing lights are different so they must be hard wired in, other than that they fit great. The headlamp…oh boy, for starters you have to create a new slot with a dremel tool for the attaching wire at the top or else you have a 1/8 ” gap between the bucket and the trim ring. Then you have to bend that bracket down and grind some off of it or else the trim ring sticks up and is not flush with the bucket, it will always be slightly up. When aiming the light you cannot get it down enough, 35″ at 25 ft. because of 2 things, the top spring on the adjuster is not long enough so it has to be stretched and the adjusting bolt is not long enough. So now that you stretched the spring and installed a new bolt, got everything aimed and the trim ring installed and looking reasonably well, take it for a ride and the adjusting screws loosen off from vibration. Take it all apart, apply blue loctite to the adjustin screws plus once adjusted as a precautionary measure put lock nuts on the back side of the adjusting screws. In final the trim ring will rattle while riding, take it off and add some very thin weather strip to stop the metal on metal contact. In the end so far they work great. But you better be good at modifying and have plenty of time on your hands. Are they worth it? Thats a tough question.