Description
LEDUR LED U7 Motorcycle Headlight DRL with – Features & Prices in Saudi Arabia :
LEDUR LED U7 Motorcycle Headlight DRL with Angel Eyes Ring Lights Driving Running Light Front Spotlight Hi/Lo Strobe Flashing White Light and Switch (2PCS,Green Halo)
Manufacturer
LEDUR
Brand
LEDUR
Model
LED U7 Headlight with Halo-2PCS Green
Item Weight
1.56 pounds
Package Dimensions
8.46 x 5 x 4.37 inches
Item model number
LED U7 Motorcyle Headlight Green Halo
Is Discontinued By Manufacturer
No
Manufacturer Part Number
LED U7 Headlight with Halo-2PCS
Mirror Adjustment
Power
Position
Front
Bulb Type
LED U7 Motorcyle Headlight Green Halo
Special Features
LED U7 Motorcyle Headlight Green Halo
Mirror Lighting Type
Super Bright LEDs, Heavy Duty Housing, Waterproof, Rust Resistant, LED Headlight Power Angel Eyes, Spotlight, Daytime Running Light, Fog Light
Voltage
12 Volts
Wattage
30 watts
Test video – LEDUR LED U7 Motorcycle Headlight DRL with :
Product highlights :
Questions & Answers – LEDUR LED U7 Motorcycle Headlight DRL with :
Technical specifications – LEDUR LED U7 Motorcycle Headlight DRL with :
Brand
LEDUR
Color
U7 Headlight-Green
Specific Uses For Product
Fog Lights
Light Source Type
LED U7 Motorcyle Headlight Green Halo
Special Feature
LED U7 Motorcyle Headlight Green Halo
Voltage
12 Volts
Wattage
30 watts
Position
Front
Lens Material
Acrylic
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
C. E (verified owner) –
3 modes out of sync – Great lights for the price. My only issue was that the 3 modes would be in sync one minute, then not another. I tried everything to find a short but there wasn’t one. I was going to disconnect one light and switch modes until they were synced but it would go back to normal randomly. But I found a fix, just not super easy. I bought mini bullet connectors for the halo lights as they are wired through the lens shroud. So I clipped them and added the connectors. This allowed me to unscrew the shroud and pop the lens out to get to the board. There is a chip with 6 solder points labeled U2 and I pried them out. Reasembeled the lights and now it’s just high beams with the halo lights and red devil on and off. 1 mode which I’m perfectly happy with. Hope this helps someone
S. I (verified owner) –
Funcionan muy bien – Compre estos faros para mi e-bike funcionan perfectamente los recomiendo,son disque para la neblina pero se ven muy bien más en la noche,la luz regular no la azul no es muy fuerte para la noche por eso son para la neblina pero la luz azul se ve muy bien el círculo al rededor
J. H (verified owner) –
Lights – Overall I like the lights so far. Nice improvement over stock lights. Definitely a big help seeing at night.
C. E (verified owner) –
3 modes out of sync – Great lights for the price. My only issue was that the 3 modes would be in sync one minute, then not another. I tried everything to find a short but there wasn’t one. I was going to disconnect one light and switch modes until they were synced but it would go back to normal randomly. But I found a fix, just not super easy. I bought mini bullet connectors for the halo lights as they are wired through the lens shroud. So I clipped them and added the connectors. This allowed me to unscrew the shroud and pop the lens out to get to the board. There is a chip with 6 solder points labeled U2 and I pried them out. Reasembeled the lights and now it’s just high beams with the halo lights and red devil on and off. 1 mode which I’m perfectly happy with. Hope this helps someone
J. H (verified owner) –
Lights – Overall I like the lights so far. Nice improvement over stock lights. Definitely a big help seeing at night.
E. J (verified owner) –
You get what you pay for. – Brackets are plastic and the semi captured stem mounting hardware spins when tightened. There is no way of holding the nut it in place, since it is captured in the stem.
K. F (verified owner) –
It works – It works.
N. S (verified owner) –
Should be half the price, several flaws. – I bought these to replace a set of Nilight leds as I preferred the mounting option of these ledur lights; (edit 12/27)* the mounting solution is the best thing about these lights and why i still have them*. After getting them, there are several flaws that make the $80 price a bit high. These same lights are 40-50 on “other” websites. They are bright to look at, and will make you seen however they do not throw light far at all. The nilights i had before were at least 50% brighter and further, AND half the price including brackets, harness (with a RELAY). I already had wiring in place so I just spliced the harness in. The other huge let down is that there is no grippy surface on the part that mounts to the bar, or the pivot that the light sits on (up and down). You cannot tighten the pivot enough to keep it in place before it cracks. You have to add rubber straps, and I ended up dabbing plastic binder to keep the pivot from moving.. againfor $80 not acceptable. These are being returned and I’m going back to my old set up, I wil just mount the lights elsewhere.
E. J (verified owner) –
Affordable visibility, well-designed and built. – I didn’t buy these as much for their ability to light my path as I did for their ability to make me more visible to the sleeping, four-wheeled, coffee-sipping, child-scolding cage-dolts that seem to need every conceivable indication that something besides their tiny, sheltered universe is sharing the road with them.
S. I (verified owner) –
Funcionan muy bien – Compre estos faros para mi e-bike funcionan perfectamente los recomiendo,son disque para la neblina pero se ven muy bien más en la noche,la luz regular no la azul no es muy fuerte para la noche por eso son para la neblina pero la luz azul se ve muy bien el círculo al rededor
K. F (verified owner) –
It works – It works.
D. N (verified owner) –
Wonderful product for the price! – Installed this lights for my Can- Am Ryker and I love them!! Packaged extremely well and very easy to install. There were no cutting wires, just simply plug and play.
E. J (verified owner) –
You get what you pay for. – Brackets are plastic and the semi captured stem mounting hardware spins when tightened. There is no way of holding the nut it in place, since it is captured in the stem.
D. N (verified owner) –
Wonderful product for the price! – Installed this lights for my Can- Am Ryker and I love them!! Packaged extremely well and very easy to install. There were no cutting wires, just simply plug and play.
E. J (verified owner) –
Affordable visibility, well-designed and built. – I didn’t buy these as much for their ability to light my path as I did for their ability to make me more visible to the sleeping, four-wheeled, coffee-sipping, child-scolding cage-dolts that seem to need every conceivable indication that something besides their tiny, sheltered universe is sharing the road with them.
N. S (verified owner) –
Should be half the price, several flaws. – I bought these to replace a set of Nilight leds as I preferred the mounting option of these ledur lights; (edit 12/27)* the mounting solution is the best thing about these lights and why i still have them*. After getting them, there are several flaws that make the $80 price a bit high. These same lights are 40-50 on “other” websites. They are bright to look at, and will make you seen however they do not throw light far at all. The nilights i had before were at least 50% brighter and further, AND half the price including brackets, harness (with a RELAY). I already had wiring in place so I just spliced the harness in. The other huge let down is that there is no grippy surface on the part that mounts to the bar, or the pivot that the light sits on (up and down). You cannot tighten the pivot enough to keep it in place before it cracks. You have to add rubber straps, and I ended up dabbing plastic binder to keep the pivot from moving.. againfor $80 not acceptable. These are being returned and I’m going back to my old set up, I wil just mount the lights elsewhere.