Description
Motoparty Motocycle Rear Footrest Pegs Foot Peg – Features & Prices in Saudi Arabia :
Motoparty Motocycle Rear Footrest Pegs Foot Peg Universal For Suzuki Baja Mini Bikes (for Baja Heat,Mini Baja,Baja Warrior),1pair(Left&Right)
Brand
Motoparty
Material
Aluminum
Vehicle Service Type
Motorcycle
Fit Type
Vehicle Specific Fit
Item Weight
0.18 Kilograms
Orientation
Rear
Manufacturer
motoparty
Item Weight
6.3 ounces
Package Dimensions
5.2 x 2.95 x 1.54 inches
Is Discontinued By Manufacturer
No
Manufacturer Part Number
MTP-M07-S-CRU-1pcs
Test video – Motoparty Motocycle Rear Footrest Pegs Foot Peg :
Product highlights :
Questions & Answers – Motoparty Motocycle Rear Footrest Pegs Foot Peg :
Technical specifications – Motoparty Motocycle Rear Footrest Pegs Foot Peg :
Brand
Motoparty
Material
Aluminum
Vehicle Service Type
Motorcycle
Fit Type
Vehicle Specific Fit
Item Weight
0.18 Kilograms
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
T. A (verified owner) –
Should get the job done – Not bad. I ditched the bracket to put them on passenger footpegs on a tw200. Had to grind the ends to get them to level.
O. B (verified owner) –
Requires trimming to make it work on MB200. – Very retrofit for the MB200. If you own a grinder or even a dremel, it is not difficult to make it work. You will need to grind off a little bit from the metal peg and trim off a little bit from the rubber boot that fits on the peg. Then it works just as well as the original! Would be five stars if I didn’t have to do the trimming to make it work!
O. B (verified owner) –
Requires trimming to make it work on MB200. – Very retrofit for the MB200. If you own a grinder or even a dremel, it is not difficult to make it work. You will need to grind off a little bit from the metal peg and trim off a little bit from the rubber boot that fits on the peg. Then it works just as well as the original! Would be five stars if I didn’t have to do the trimming to make it work!
K. T (verified owner) –
Entry level pegs. Good value. – Far from top of the line ” Factory” pegs. But for a inexpensive & infrequently used buddy peg option. They are a good value for the money.
M. O (verified owner) –
Works with some mods – Thèse worked on my Baja mini bikes, but it does take some modifications… not just a bolt on item.
M. O (verified owner) –
Works with some mods – Thèse worked on my Baja mini bikes, but it does take some modifications… not just a bolt on item.
P. J (verified owner) –
Baja Warrior – I bought these for my 196cc Baja Warrior thinking they would be a direct fit. They are not but they can still be installed with NO modifications. Just add a spacer to fill the gap when you put them on the frame and use the original pin.
L. R (verified owner) –
Tiny but convenience – These is not fit the Axis 200 from Lowes or Coleman 200, but I drill the hole both size to make it work. My little daughter likes to drive with me, so I let her feet’s rest on the factory rest and my feet’s will rest on this. It is little weak for my expectation, but it does the job. I just need to have something to rest on instead of hang on the air. I would never stand on it for sure. It has rubber grip than the original pedals on my minibike. They are just about on the verge of being too angled for me feet to rest on but the black is good looking. My feet’s is size 10 not to wide, and this one is really tinny for me. I will have to see how they hold up over time.
K. T (verified owner) –
Entry level pegs. Good value. – Far from top of the line ” Factory” pegs. But for a inexpensive & infrequently used buddy peg option. They are a good value for the money.
G. T (verified owner) –
Good replacement for rear buddy pegs on Icebear Champion (CT70 clone) – Was a direct replacement for the rear buddy pegs (one of which vibrated off) on my Icebear Champion CT70 clone motorcycle. I was even able to use the stock mount with these pegs, which have a bit to keep them properly orientated so that’s a bonus. Only 4 stars as these are pretty cheaply made and there are a couple bubbles in one chrome end cap, I doubt they will last too many years.
B. G (verified owner) –
Eh, had to modify. – Had to modify to install. Look like they are bending backward like the last ones. Probably make my own next time out of quality materials.
B. G (verified owner) –
Eh, had to modify. – Had to modify to install. Look like they are bending backward like the last ones. Probably make my own next time out of quality materials.
L. R (verified owner) –
Tiny but convenience – These is not fit the Axis 200 from Lowes or Coleman 200, but I drill the hole both size to make it work. My little daughter likes to drive with me, so I let her feet’s rest on the factory rest and my feet’s will rest on this. It is little weak for my expectation, but it does the job. I just need to have something to rest on instead of hang on the air. I would never stand on it for sure. It has rubber grip than the original pedals on my minibike. They are just about on the verge of being too angled for me feet to rest on but the black is good looking. My feet’s is size 10 not to wide, and this one is really tinny for me. I will have to see how they hold up over time.
G. T (verified owner) –
Good replacement for rear buddy pegs on Icebear Champion (CT70 clone) – Was a direct replacement for the rear buddy pegs (one of which vibrated off) on my Icebear Champion CT70 clone motorcycle. I was even able to use the stock mount with these pegs, which have a bit to keep them properly orientated so that’s a bonus. Only 4 stars as these are pretty cheaply made and there are a couple bubbles in one chrome end cap, I doubt they will last too many years.
P. J (verified owner) –
Baja Warrior – I bought these for my 196cc Baja Warrior thinking they would be a direct fit. They are not but they can still be installed with NO modifications. Just add a spacer to fill the gap when you put them on the frame and use the original pin.
T. A (verified owner) –
Should get the job done – Not bad. I ditched the bracket to put them on passenger footpegs on a tw200. Had to grind the ends to get them to level.