Description
Motorcycle 22mm 7/8 inch Handguards Universal Hand – Features & Prices in Saudi Arabia :
Motorcycle 22mm 7/8 inch Handguards Universal Hand Guards For Dirt Pit Bike ATV WR250F WR450F YZ450F YZ125 YZ250 YZ250F Enduro Motocross Blue
Manufacturer
AnXin
Brand
AnXin
Item Weight
1.44 pounds
Package Dimensions
15.1 x 6.8 x 3.3 inches
Is Discontinued By Manufacturer
No
Manufacturer Part Number
R15140024
Special Features
Professional Audience
Test video – Motorcycle 22mm 7/8 inch Handguards Universal Hand :
Product highlights :
Questions & Answers – Motorcycle 22mm 7/8 inch Handguards Universal Hand :
Technical specifications – Motorcycle 22mm 7/8 inch Handguards Universal Hand :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
G. E (verified owner) –
Would not trust these as protection on a full size bike. – The description is clear that these are for smaller bikes and I bought them for my son’s 110, but during install, I needed to do some “tweaking” to make them fit better and they bent with moderate effort in a vice. Hopefully they’ll serve their purpose on my son’s lighter bike.
G. R (verified owner) –
Utter rubbish. – Needed some bark busters on short notice and unfortunately this popped up in my search. They are worthless. One crash and the mounting bolt in the bar broke. Don’t buy these. Look for quality which is not this
T. F (verified owner) –
Soft Metal… Not worth the money. – Product looks exactly like name brand hand guards but is made out of much weaker material. The aluminum is much softer and more bendable. They are lighter and can be bent by hand. Mounting hardware is okay, but again made from low quality materials. These hand guards may work okay on a light kids bike or a dual sport that is mostly ridden on the road. I do not recommend them for a bike that is going to be ridden in tough conditions.
L. R (verified owner) –
Fits and looks great, with a little work! – I was happy with these hand guards right out of the box! They’re sturdy, yet light, with good hardware and a sleek design. They feel really solid when installed! The issue I ran into, as others have, is that the handlebar anchors were too small to fit the inside of my steel handlebars properly. I tested the anchors in some aluminum handlebars, from a KX250, and they fit perfect; so I assume they used this size to accommodate both aluminum and steel handlebars, but they really should include a proper spacer for steel bars! To resolve this issue I cut a piece of 3/4″ PVC electrical conduit, then I cut a section out of the center of it, and, lastly, I heated the cut conduit up with a heat gun and carefully closed the conduit over the handlebar anchor. This gave me a perfect sized spacer for the steel handlebars on my Honda CRF230f! Another modification I made was to slightly grind down the sharp edges on the hand guard brackets, because those edges make contact with my front brake hose and clutch cable, so vibration would likely cause damage to the hose and cable over time. These modifications were not hard to do and I got a really nice finished product, so I’m not gonna ding them, considering the great price. I’m very happy with my purchase!
E. A (verified owner) –
A must have – Look and work great for the money. Make sure to trim out enough of your grip and plastic on the throttle side. Otherwise the throttle will stick open. Looks great on my xr600r!
M. O (verified owner) –
Great full hand protection and cheap! – I put a pair of these handguards on every bike I have owned. The mounting hardware is the only reason I wont give 5 stars. I purchased Cycra bar mount clamps and a Tusk bar end bolt kit. I race hare scrambles and these are fantastic. They dont move, even when smashing trees or clapping the ground. I have not bent a pair to date as well.
T. F (verified owner) –
Soft Metal… Not worth the money. – Product looks exactly like name brand hand guards but is made out of much weaker material. The aluminum is much softer and more bendable. They are lighter and can be bent by hand. Mounting hardware is okay, but again made from low quality materials. These hand guards may work okay on a light kids bike or a dual sport that is mostly ridden on the road. I do not recommend them for a bike that is going to be ridden in tough conditions.
L. O (verified owner) –
Muy buenos me an protegido bastante – Me gustan
L. R (verified owner) –
Fits and looks great, with a little work! – I was happy with these hand guards right out of the box! They’re sturdy, yet light, with good hardware and a sleek design. They feel really solid when installed! The issue I ran into, as others have, is that the handlebar anchors were too small to fit the inside of my steel handlebars properly. I tested the anchors in some aluminum handlebars, from a KX250, and they fit perfect; so I assume they used this size to accommodate both aluminum and steel handlebars, but they really should include a proper spacer for steel bars! To resolve this issue I cut a piece of 3/4″ PVC electrical conduit, then I cut a section out of the center of it, and, lastly, I heated the cut conduit up with a heat gun and carefully closed the conduit over the handlebar anchor. This gave me a perfect sized spacer for the steel handlebars on my Honda CRF230f! Another modification I made was to slightly grind down the sharp edges on the hand guard brackets, because those edges make contact with my front brake hose and clutch cable, so vibration would likely cause damage to the hose and cable over time. These modifications were not hard to do and I got a really nice finished product, so I’m not gonna ding them, considering the great price. I’m very happy with my purchase!
G. E (verified owner) –
Would not trust these as protection on a full size bike. – The description is clear that these are for smaller bikes and I bought them for my son’s 110, but during install, I needed to do some “tweaking” to make them fit better and they bent with moderate effort in a vice. Hopefully they’ll serve their purpose on my son’s lighter bike.
G. R (verified owner) –
Utter rubbish. – Needed some bark busters on short notice and unfortunately this popped up in my search. They are worthless. One crash and the mounting bolt in the bar broke. Don’t buy these. Look for quality which is not this
M. F (verified owner) –
Does NOT fit Honda CRF110. – We liked them but they did not fit our Honda CRF110 that we purchased them for.
M. F (verified owner) –
Does NOT fit Honda CRF110. – We liked them but they did not fit our Honda CRF110 that we purchased them for.
M. O (verified owner) –
Great full hand protection and cheap! – I put a pair of these handguards on every bike I have owned. The mounting hardware is the only reason I wont give 5 stars. I purchased Cycra bar mount clamps and a Tusk bar end bolt kit. I race hare scrambles and these are fantastic. They dont move, even when smashing trees or clapping the ground. I have not bent a pair to date as well.
L. O (verified owner) –
Muy buenos me an protegido bastante – Me gustan
E. A (verified owner) –
A must have – Look and work great for the money. Make sure to trim out enough of your grip and plastic on the throttle side. Otherwise the throttle will stick open. Looks great on my xr600r!