QUASCO Flush Mount Motorcycle Turn Signals Smoked – Features & Prices in Saudi Arabia :
QUASCO Flush Mount Motorcycle Turn Signals Smoked Lens led Blinkers Compatible with Yamaha YZF R1 R3 R6 R6S FJ 09 FZ MT 07 09, Amber
Manufacturer
QUASCO
Brand
QUASCO
Item Weight
1.13 ounces
Package Dimensions
2.87 x 1.93 x 1.93 inches
Item model number
FBAQAMP00070
Manufacturer Part Number
FBAQAMP00070
Position
Front
Bulb Type
LED
Special Features
Waterproof
Voltage
12 Volts (DC)
Test video – QUASCO Flush Mount Motorcycle Turn Signals Smoked :
Product highlights :
Fitment: Compatible with Yamaha FJ-09, FZ-07, FZ-09, FZ6R, FZ8, FZS1000 FZ1, FZS600 FZ6, MT-07, MT-09, YZF-R1, YZF-R3, YZF-R3 ABS, YZF-R3, YZF-R6, YZF-R6, YZF-R6S, and other DC 12V system motorcycles equipped with 10mm mount hole turn signals
Super Bright: Equipped with 14pcs SMD high brightness chips per turn signals, brighter than halogen bulb, bright light output makes you more noticeable when driving to increase safety. Recommend adding flasher relay if your blinkers get hyper flash
Flush Mount Easy Installation: Plug and play, no modification required, come with strong adhesive tape for perfect fit, Just splice two wires into turn singnal harness. black wire for negative, yellow wire for turn signal lights
Waterproof: Made from high quality ABS PC lens, sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snowy days. Great improvement over your old dull blinkers
Package Including: 1 pair led motorcycle turn signa.l light front indicators. worry-free 180 days manufacture warranty, and friendly customer service
➕ What is the price of QUASCO Flush Mount Motorcycle Turn Signals Smoked in Saudi Arabia ?
The price of QUASCO Flush Mount Motorcycle Turn Signals Smoked in-store is SAR VAT.
➕ When QUASCO Flush Mount Motorcycle Turn Signals Smoked was released ?
The release date was .
➕ What is the price of QUASCO Flush Mount Motorcycle Turn Signals Smoked cheap used ?
The price of QUASCO Flush Mount Motorcycle Turn Signals Smoked used is SAR VAT.
➕ What are the main characteristics of QUASCO Flush Mount Motorcycle Turn Signals Smoked ?
Special specifications :
Fitment: Compatible with Yamaha FJ-09, FZ-07, FZ-09, FZ6R, FZ8, FZS1000 FZ1, FZS600 FZ6, MT-07, MT-09, YZF-R1, YZF-R3, YZF-R3 ABS, YZF-R3, YZF-R6, YZF-R6, YZF-R6S, and other DC 12V system motorcycles equipped with 10mm mount hole turn signals
➕ Is it interesting to buy this product ?
The best people who can answer you are customers who have already bought and tested this product (See Customer Reviews). This product is rated 4.3 / 5 on Amazon.
➕ Where to buy QUASCO Flush Mount Motorcycle Turn Signals Smoked in Saudi Arabia ?
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
Proof of purchase :
Does the shop give you an invoice ?
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
16 reviews for QUASCO Flush Mount Motorcycle Turn Signals Smoked
Rated 5 out of 5
I. C (verified owner)–
Quick install, nice look – Extremely quick and easy install on fz07. Good quality light and brightness
Rated 4 out of 5
A. C (verified owner)–
R3 Owners be aware – The product itself does what it says great, but during the installation I noticed that the right side of the bikes lighting harness is a bit short, so if u turn ur handle bar all the way to the right it pulls the connector loose. I fixed this by simply extending the length of the wiring on the light itself. After extending the wire, the lights worked great, and stopped clipping on the handle bar.
Rated 5 out of 5
I. C (verified owner)–
Quick install, nice look – Extremely quick and easy install on fz07. Good quality light and brightness
Rated 5 out of 5
M. L (verified owner)–
Bright and easy to install – Plug and play
Rated 5 out of 5
M. L (verified owner)–
Bright and easy to install – Plug and play
Rated 4 out of 5
D. F (verified owner)–
Mounting is stupid… – They look good, they function properly. But im only giving 4 stars because it uses a very thin strip of adhesive tape to mount the lights to the bike
Rated 3 out of 5
R. Z (verified owner)–
Pretty decent – Pretty good just find something else better to mount it with other than what they sent. The sticky tape doesn’t stick
Rated 5 out of 5
Z. P (verified owner)–
Great for the price! – Way better looking than the original ones… had to splice 2 wires each side, not hard at all! Would recommend!
Rated 4 out of 5
T. K (verified owner)–
Simple enough. Looks ok. Gets the job done. – 2000 Honda CBR600F4. Fitment was ok on my bike, doesn’t quite sit flush, simple, cost effective design, had to super glue the lenses back on because they popped off easily.. may have just been my batch so not sure of the quality control.. cannot imagine it’s that great considering the cost and manufacturer.. does the job. Didn’t have light at all before so this is definitely better than nothing.
Rated 4 out of 5
D. F (verified owner)–
Mounting is stupid… – They look good, they function properly. But im only giving 4 stars because it uses a very thin strip of adhesive tape to mount the lights to the bike
Rated 4 out of 5
T. K (verified owner)–
Simple enough. Looks ok. Gets the job done. – 2000 Honda CBR600F4. Fitment was ok on my bike, doesn’t quite sit flush, simple, cost effective design, had to super glue the lenses back on because they popped off easily.. may have just been my batch so not sure of the quality control.. cannot imagine it’s that great considering the cost and manufacturer.. does the job. Didn’t have light at all before so this is definitely better than nothing.
Rated 3 out of 5
R. Z (verified owner)–
Pretty decent – Pretty good just find something else better to mount it with other than what they sent. The sticky tape doesn’t stick
Rated 4 out of 5
A. C (verified owner)–
R3 Owners be aware – The product itself does what it says great, but during the installation I noticed that the right side of the bikes lighting harness is a bit short, so if u turn ur handle bar all the way to the right it pulls the connector loose. I fixed this by simply extending the length of the wiring on the light itself. After extending the wire, the lights worked great, and stopped clipping on the handle bar.
Rated 5 out of 5
Z. P (verified owner)–
Great for the price! – Way better looking than the original ones… had to splice 2 wires each side, not hard at all! Would recommend!
Rated 4 out of 5
N. K (verified owner)–
Good but could use improvement – Purchased and installed with ease. On if the lights had half of the LEDs lighting up. Then with 100° Texas heat the adhesive that was provided failed. Didn’t take it for a ride or anything the adhesive just didn’t hold up. Cut some extra strength scotch tape to fill in the gap. Never had trouble with that so it should be fine
Rated 4 out of 5
N. K (verified owner)–
Good but could use improvement – Purchased and installed with ease. On if the lights had half of the LEDs lighting up. Then with 100° Texas heat the adhesive that was provided failed. Didn’t take it for a ride or anything the adhesive just didn’t hold up. Cut some extra strength scotch tape to fill in the gap. Never had trouble with that so it should be fine
I. C (verified owner) –
Quick install, nice look – Extremely quick and easy install on fz07. Good quality light and brightness
A. C (verified owner) –
R3 Owners be aware – The product itself does what it says great, but during the installation I noticed that the right side of the bikes lighting harness is a bit short, so if u turn ur handle bar all the way to the right it pulls the connector loose. I fixed this by simply extending the length of the wiring on the light itself. After extending the wire, the lights worked great, and stopped clipping on the handle bar.
I. C (verified owner) –
Quick install, nice look – Extremely quick and easy install on fz07. Good quality light and brightness
M. L (verified owner) –
Bright and easy to install – Plug and play
M. L (verified owner) –
Bright and easy to install – Plug and play
D. F (verified owner) –
Mounting is stupid… – They look good, they function properly. But im only giving 4 stars because it uses a very thin strip of adhesive tape to mount the lights to the bike
R. Z (verified owner) –
Pretty decent – Pretty good just find something else better to mount it with other than what they sent. The sticky tape doesn’t stick
Z. P (verified owner) –
Great for the price! – Way better looking than the original ones… had to splice 2 wires each side, not hard at all! Would recommend!
T. K (verified owner) –
Simple enough. Looks ok. Gets the job done. – 2000 Honda CBR600F4. Fitment was ok on my bike, doesn’t quite sit flush, simple, cost effective design, had to super glue the lenses back on because they popped off easily.. may have just been my batch so not sure of the quality control.. cannot imagine it’s that great considering the cost and manufacturer.. does the job. Didn’t have light at all before so this is definitely better than nothing.
D. F (verified owner) –
Mounting is stupid… – They look good, they function properly. But im only giving 4 stars because it uses a very thin strip of adhesive tape to mount the lights to the bike
T. K (verified owner) –
Simple enough. Looks ok. Gets the job done. – 2000 Honda CBR600F4. Fitment was ok on my bike, doesn’t quite sit flush, simple, cost effective design, had to super glue the lenses back on because they popped off easily.. may have just been my batch so not sure of the quality control.. cannot imagine it’s that great considering the cost and manufacturer.. does the job. Didn’t have light at all before so this is definitely better than nothing.
R. Z (verified owner) –
Pretty decent – Pretty good just find something else better to mount it with other than what they sent. The sticky tape doesn’t stick
A. C (verified owner) –
R3 Owners be aware – The product itself does what it says great, but during the installation I noticed that the right side of the bikes lighting harness is a bit short, so if u turn ur handle bar all the way to the right it pulls the connector loose. I fixed this by simply extending the length of the wiring on the light itself. After extending the wire, the lights worked great, and stopped clipping on the handle bar.
Z. P (verified owner) –
Great for the price! – Way better looking than the original ones… had to splice 2 wires each side, not hard at all! Would recommend!
N. K (verified owner) –
Good but could use improvement – Purchased and installed with ease. On if the lights had half of the LEDs lighting up. Then with 100° Texas heat the adhesive that was provided failed. Didn’t take it for a ride or anything the adhesive just didn’t hold up. Cut some extra strength scotch tape to fill in the gap. Never had trouble with that so it should be fine
N. K (verified owner) –
Good but could use improvement – Purchased and installed with ease. On if the lights had half of the LEDs lighting up. Then with 100° Texas heat the adhesive that was provided failed. Didn’t take it for a ride or anything the adhesive just didn’t hold up. Cut some extra strength scotch tape to fill in the gap. Never had trouble with that so it should be fine